AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter · #1 ·
I ran into a post the other day that described how to see the diagnostic mode. I stupidly figured I would remember where that post was, and of course can't now... can anyone tell me the secret? :)
 

·
Registered
Joined
·
357 Posts
Discussion Starter · #2 ·
Holy cow I found it... :)


"To enter diagnostics with NYC's TWC (3100HD), you hold down both +(SELECT) and EXIT until 'diag' is displayed on the converter. Then enter 1999 with the remote. The diagnostic page shows data on the last channel tuned. You can tune new channels while in diagnostics by using UP/DWN/LFT/RT buttons around SELECT. Scroll to the TUNING> page, then to four-digit channel numbers, tap in a new channel, and press SELECT. Scroll left to select various data pages."
 

·
Registered
Joined
·
3,335 Posts
For Cox (Fairfax) ... you hold down the +(SELECT) on the box (not the remote) until the green light flashes. Then you hit INFO. A diag screen is displayed. Page up/down can be used to see various pages.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top