AVS Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
488 Posts
Discussion Starter #1
I just hooked up a great antenna Silver Sensor and I'm getting loads of channels but I have some that I get a "No AV" message, what does this mean?? Is it that a signal is being sent but and empty signal maybe a station thats not quite live yet?


Also for some stations I'm getting two signals a HD and SD but they are transmitting the same programs, do I need to keep the SD versions memorized or can I delete them?
 

·
Registered
Joined
·
393 Posts
It means that the signal for that station is not locked. If you go to the signal strength meter when you tune that channel the bar will be very low or moving up and down from one bar to another. Moving the antenna normally locks the station, or maybe nothing is being broadcast on that channel, here you would have a strong signal just no video. You can delete the channels you do not want.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top