AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Are there any discrete codes for source selection on the xx69/71's? It's impossible to use a universal remote with macros when you have to push the source button some variable number of times to get to the source you want. I thought I could do it through the menu, but since that rolls over, you can't just go to the top with a fixed number of "ups" and count the sources down.
 

·
Registered
Joined
·
6,225 Posts
I don't know of any direct input source codes. However these sets have HDMI-CEC implemented. Samsung calls it Anynet+ but it works with all HDMI-CEC components, not just Samsung Anynet+ devices.


Connect any HDMI-CEC source component to one of the three HDMI inputs on the Samsung with an HDMI 1.3a cable and whenever you power on the source the Samsung will also power up and select the correct input. You must enable the function on each source component and on the Samsung.
 
1 - 2 of 2 Posts
Top