AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hello everyone, does anyone know how to adjust the tilt of the screen on this Samsung? I don't see tilt correction anywhere in the menu. Also I didn't know where to post this topic so I hope it is in the right place. Thanks
 

·
DIY Granddad (w/help)
Joined
·
24,841 Posts
Your asking for directions to adjust the "image" tilt on a 27" CRT Television that is over 10 years old?



( ...I think your really askin' about the Trapezoidal adjustment feature....)


OK.....first go here to the Direct View CRT TV Forum:

http://www.avsforum.com/f/64/direct-view-single-tube-crt-displays


And if no one who ever owned one is still alive after all this time, go here"

http://search.yahoo.com/r/_ylt=A0oG7k55SHVRTjcA0CVXNyoA;_ylu=X3oDMTE1OXZmMzN2BHNlYwNzcgRwb3MDNQRjb2xvA2FjMgR2dGlkA1ZJUDIyOF8yNTA-/SIG=12cebpjkh/EXP=1366669561/**http%3a//www.samsung.com/us/support/owners/product/TXM2756


.......and / or here.... a link to a PDF file of the original Manual:

http://search.yahoo.com/r/_ylt=A0oG7k55SHVRTjcAyiVXNyoA;_ylu=X3oDMTE1Y292anU0BHNlYwNzcgRwb3MDMgRjb2xvA2FjMgR2dGlkA1ZJUDIyOF8yNTA-/SIG=12bj3hqj4/EXP=1366669561/**http%3a//www.manualowl.com/p/Samsung/TXM2756/Manual/80199


Good luck "Tiltin' "
 

·
Registered
Joined
·
1,894 Posts
On my Panny it's called Geomagnetic Correction within its Video menu.


I had an old RCA Home Theater 31" that only had a polarity switch on the back.


Some sets just didn't have it, they auto-corrected to the best of their ability as part of the power-on degauss (boing sound heard when powering up). Hopefully your degauss circuit still works. Would typically settle out after a few days of normal power cycling to correct for changing the orientation of the TV vs. the magnetic poles after moving the set. My Panny also degausses after exiting the GC menu mentioned above. Be careful if you manually trigger the degauss though to let the circuit cool at least 15 minutes between tries.
 
1 - 3 of 3 Posts
Top