I am attempting to calibrate two Sanyo projectors, PLC - XP57L and XF60. I have managed to get the service manual from the local importer and can access the service menu. Has anyone calibrated either of these two models?
I am new to this and am struggling to identify the controls to be used in the "Service Adjustment Data Table" I would like to start by calibrating the PC input. It appears that these are situated in Group No. 200. Within this group are Adjustment Items like:
RGB_SIG_CNTR
RGB_PSGA
RGB PSGB
RGB_GAIN_CTRL
RGB_VCOM_CTRL
RGB_GAM_BRT
USR_GAIN
RGB_SUB_GAIN
RGB_SUB_BRT
RGB_BRT_CTRL
RGB_REAL_GAM_BRT
RGB_BRT_CTRL
I have spent many hours with my calibration sofware and probe trying each of these controls in an effort to work out which to use.
I would appreciate any advice.
I am new to this and am struggling to identify the controls to be used in the "Service Adjustment Data Table" I would like to start by calibrating the PC input. It appears that these are situated in Group No. 200. Within this group are Adjustment Items like:
RGB_SIG_CNTR
RGB_PSGA
RGB PSGB
RGB_GAIN_CTRL
RGB_VCOM_CTRL
RGB_GAM_BRT
USR_GAIN
RGB_SUB_GAIN
RGB_SUB_BRT
RGB_BRT_CTRL
RGB_REAL_GAM_BRT
RGB_BRT_CTRL
I have spent many hours with my calibration sofware and probe trying each of these controls in an effort to work out which to use.
I would appreciate any advice.
