AVS Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
229 Posts
Discussion Starter · #1 ·
I have my Z4 currently mounted in the same place where my Infocus X10 was which is 18ft away from a 110" diagonal Da-Lite 1.0 gain screen. I just ran the numbers with Sanyo's website and it tells me for a 110" diag screen it should be 11ft away. Seating is about 16-17 feet away from screen, almost underneath projector.


I have found this thread:
http://www.avsforum.com/avs-vb/print...&page=53&pp=30


I also used projector peoples calculator which shows the max and explains why I kept 18ft, but does not answer my questions below


My question is :

1. what do I gain or even lose if I move it that close ?

2. will picture be much more clearer/sharper ?


Thanks in advance

Neville
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top