AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter · #1 ·
I have a Panasonic L300U with DVI-D in female connector and have ordered a Sapphire ATI Radeon 9700 pro that I wanted to connect to the L300U using the DVI connections. The 9700 has a DVI-I female connection and I am not sure if these two can be connected. DVI-D and the DVI-I look very much the same. Does anyone here have this set-up ? Any links to a site that maybe able to help me? Thanks.

John
 

·
Registered
Joined
·
405 Posts
John I have the ATI AIW 8500 with the same dvi-i output. DVI-I contains both the digital info (in the long series of pins) and the analog VGA output in the cross like pins as with a DVI-i to VGA dongle you can connect there an ordinary VGA monitor.... You can buy a good Male DVI-D to DVI-D cable and connect it with your Panasonic. I have an HS10 Take a look at my thread regarding the cable....
http://www.avsforum.com/avs-vb/showt...hreadid=247144
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top