AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
Hello all

This is my first post and I am a complete beginner with projectors. I have a Benq 1070 and after lining up the projector I get sides that are slightly angled, creating gaps between the screens boarder. bellow is a slightly exaggerated example of what I am seeing:
 

Attachments

·
Registered
Joined
·
3,874 Posts
Welcome to the forum. You are in the wrong section of the forum for your question. The problem is not how the projector is calibrated, but how it is installed physically. There may be digital keystone correction provided in the adjustment menu, but such a feature should be avoided if at all possible. Using it will seriously reduce resolution and image integrity.

To to the 'Digital Projectors' section of the forum for help with your installation: http://www.avsforum.com/forum/68-digital-projectors-under-3-000-usd-msrp/ .
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top