AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 ·
I have a SHARP XV-2000 pj hooked up to a Yamaha RX-V2700 with HDMI to HDMI adapter to DVI cable to the pj. I get component pass through but no upscaling and a HDMI error message which indicates a HDCP problem. I looked through the manual, but can't find anything re. HDCP.

Thanks for any and all help,

Bill
 

·
Registered
Joined
·
745 Posts
I've never tried that model Yamaha on a Z2000, but I have hooked up many things and never got a error message. It is compliant I can tell you that much. Best I remember I've connected Directivo, DVDO VP30, VP50, HD-DVD and never saw a problem. Probably some other things also but its been awhile.


If I remember right if when I'd turn off the HDCP on the DVDO the Z2000 would go blank, because of losing the handshake thing, over HDMI.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top