AVS Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
297 Posts
Discussion Starter · #1 ·
Hi guys. I have a 60 inch plasma and I'm looking for a wall mount that is the slimmest or most low profile. By slim or low profile, I mean a wall mount that will hold the TV with as little space between the wall and the TV as possible.


So do you guys have any suggestions as to which wall mount might hold the TV to the wall as close as possible?
 

·
Registered
Joined
·
298 Posts

Quote:
Originally Posted by caunyd /forum/post/18201497


Hi guys. I have a 60 inch plasma and I'm looking for a wall mount that is the slimmest or most low profile. By slim or low profile, I mean a wall mount that will hold the TV with as little space between the wall and the TV as possible.


So do you guys have any suggestions as to which wall mount might hold the TV to the wall as close as possible?

Wait a second, so you want one that DOESN'T stick out 3-4 inches? I'm confused.


I mean, when I saw the word "slim", I immediately assumed you wanted one that stuck out a lot. But then you go and throw a curveball and say you want one that doesn't stick out? Man, you're too confusing.
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #3 ·

Quote:
Originally Posted by HardBat /forum/post/18201576


Wait a second, so you want one that DOESN'T stick out 3-4 inches? I'm confused.


I mean, when I saw the word "slim", I immediately assumed you wanted one that stuck out a lot. But then you go and throw a curveball and say you want one that doesn't stick out? Man, you're too confusing.

haha fair enough. So any suggestions?
 

·
Registered
Joined
·
80 Posts
monoprice.com has a wide selection with some extremely slim mounts.


I found a mount that was 0.8" off the wall and still offers tilting, I'll see if I can find the package to tell you the brand.
 

·
Registered
Joined
·
692 Posts
Is tilting a needed feature?


There are two on Newegg that will support a 60" plasma. One is made by Peerless and is 0.4" and the other is 0.39" (forgot the brand). I think that's about as thin as you will find anywhere.
 

·
Registered
Joined
·
692 Posts
Whoa! Why is it only $12.xx? All other mounts I've seen are $65 - $120+. This almost seems to cheap to trust with holding up a 70lb television.
 

·
Registered
Joined
·
80 Posts

Quote:
Originally Posted by HX_Guy /forum/post/18203383


Whoa! Why is it only $12.xx? All other mounts I've seen are $65 - $120+. This almost seems to cheap to trust with holding up a 70lb television.

Honest pricing? These things are just a bit of steel, why should it be more?
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #9 ·
Thanks for the suggestions guys. No I don't need tilting. I don't know if you guys feel the same way, but sometimes I see a plasma/lcd that has a thick mount and I think to myself, well what's the point of the TV being so sleek and slim, when the mount makes it look a lot bigger.
 

·
Registered
Joined
·
80 Posts

Quote:
Originally Posted by caunyd /forum/post/18205115


Thanks for the suggestions guys. No I don't need tilting. I don't know if you guys feel the same way, but sometimes I see a plasma/lcd that has a thick mount and I think to myself, well what's the point of the TV being so sleek and slim, when the mount makes it look a lot bigger.

Here's a direct link if you're interested in the 0.3" mount.
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #11 ·
Hi guys, I have a Pioneer PRO-141fd and I contacted monoprice and they stated their 6434 mount doesn't work on my TV. They said that the PRO-141FD has a mounting pattern of 850x500. And the closest mount that monoprice supports is 1050x450.


Can you guys suggest a low profile/slim wall mount that would work for the Pioneer 141?
 

·
Registered
Joined
·
90 Posts
heres a little piece of advice if you do decide to go with a mount real close to the wall. put a recessed wall plate right behind your inputs. i learned the hard way and snapped my hdmi cable when i went to hang the tv, there just wasnt enough room for the cable
 

·
Registered
Joined
·
104 Posts

Quote:
Originally Posted by caunyd /forum/post/18201497


Hi guys. I have a 60 inch plasma and I'm looking for a wall mount that is the slimmest or most low profile. By slim or low profile, I mean a wall mount that will hold the TV with as little space between the wall and the TV as possible.


So do you guys have any suggestions as to which wall mount might hold the TV to the wall as close as possible?

I've got ultra slim Pioneer KRP-WM01 for my 141FD, can't be happier.
 

·
Registered
Joined
·
297 Posts
Discussion Starter · #15 ·

Quote:
Originally Posted by Yog /forum/post/18237546


I've got ultra slim Pioneer KRP-WM01 for my 141FD, can't be happier.

Yog how far from the wall does the KRP-WM01 stick out?
 
1 - 16 of 16 Posts
Top