Hi, Bally. I believe the porocedure is the same as for my Sony VPL 400. After replacing the lamp, using the key pads on the projector's control panel , press the following keys in the following order for less than 5 seconds each:
LIGHT, ARROW LEFT, ARROW RIGHT, ENTER. This will reset lamp hours.
If, after hitting the power key, the message: Please Replace Lamp appears, repeat the above procedure again.
Hope this works.
LIGHT, ARROW LEFT, ARROW RIGHT, ENTER. This will reset lamp hours.
If, after hitting the power key, the message: Please Replace Lamp appears, repeat the above procedure again.
Hope this works.
