AVS Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Banned
Joined
·
2,582 Posts
Discussion Starter · #1 ·
I know a lot of guys here at one time or another including myself were looking for the control cable to hook up their projector to a VPR722 controler.


Here is a link to an e bay auction for one that looks to be really good. I bought an original SONY cable from an auction on EBAY and it was perfect.


So if any of you out there are still looking for one this may be your chance.



http://cgi.ebay.com/ws/eBayISAPI.dll...tem=1356521155
 

·
Registered
Joined
·
253 Posts
just a FYI, there are several differnt Sony 14 pin cables available. im not sure which is proper for the 722, but the 127* series switchers and 12** projectors call for the CCQ or SIC series of cables. this may work fine, but the model is not specified for them. i mention this as it states in the Ebay auction for use with 1271 switcher, which connects to 12** projectors...
 

·
Banned
Joined
·
2,582 Posts
Discussion Starter · #3 ·
The 14 pin cable in the above post is for use with the VPR 722 (controler) and SONY projectors that have a 14 pin connector and specify a VPR 722 controler to be hooked up to them.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top