AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,781 Posts
Discussion Starter · #1 ·
One of my HD200 units frequently drops channels. For instance, I will try to tune to channel 8.1 and find it no longer is there. I will do a re-scan, and sometimes it will find it -or- sometimes it finds it but places it as 80.1. I've re-scanned the channels over 20 times since I purchased the unit 1 month ago, and yet everytime I power it on I am missing at least 1 digital channel. Has anybody else had this problem?


The unit was manufactured in Dec. 2002 and has the latest software (1.04).
 

·
Registered
Joined
·
241 Posts
Have not had that problem. But, have you tried a complete reset? Hold in the right left arrow buttons on the unit and press select. I think the last entry is to completely reset the unit to out of box. Press the down arrow on the box to that entry and press select. Start from scratch and see what happens.
 

·
Registered
Joined
·
331 Posts
This may be the station's problem. If they change their PSIP data for their "mapped" station number, the receiver will pick up the correction the first time to tune to it. 80.1 is the default channel number for most encoders - maybe they changed something.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top