AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Apologies for the noob-ish question, but the information in the manual and what I've found on-line for this sub is awful.

I have one of these subs in my home theater and was wondering if the speaker outputs on this thing can be used to power a second, passive subwoofer?

In addition to the line-in, there are speaker level inputs and outputs as well.

I don't have enough posts to link out to an image, but you can see the inputs / outputs here. (remove the spaces from the http and colon)

h t t p : //club-vaio.com.ua/media/upload/shop/192/normal/5906_3.jpg
 

·
Premium Member
Joined
·
10,897 Posts
The owner's manual says nothing about a crossover / low-pass filter / cut-off frequency / etc. so my guess is that the speaker-level inputs let you pass a full-range audio stream from receiver to sub, and the outputs pass the same stream on to a pair of speakers. You would not use the latter stream to power a passive sub.
 
1 - 2 of 2 Posts
Top