AVS Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter #1
Does anybody have a picture of the 1031 tube neck with deflection yoke, CRT neck assembly and CRT neck assy mounted? The service manual is not clear in mount direction of the CRT neck assy (2-pole magnet). Shows the mounting clamb to the socket or the face of the tube??? Is there help for me?

Also there are no distances shown in the service manual, like in a NEC service maual. There is everything clear???

Many thanks

Daniel
 

·
Banned
Joined
·
2,582 Posts
Im sure Curt Palme will chime in here he is a retube expert so he should know the correct answer.


I would think that the clamp goes tward the socket end ot the tube. I dont think I have ever seen the clamp on the face side of the tube, but Im no tube expert either.


Have a look at the other tubes if you have not messed with them they should all look the same but Im guessing you didnt assemble them yet or dont have access to another assembled tube.


If you can Email CURT PALME or TIM from E tech they are both expert retubers.
 

·
Registered
Joined
·
18,501 Posts
I'll be working on a 1031 this weekend. I'll try to remember to post a pix of the assembly.


Curt
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top