AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
241 Posts
Discussion Starter · #1 ·
Hello,


I have to lift the subwoofer cable coming out of the preout on my Pioneer SC-07 to get a signal. What can I do to remedy the problem, will the jack need to be replaced, and is that even possible? I tried 3 different cables, so I ruled them out. I also tried separating the post a little to get a tighter connection within the jack, but only having the cord lifted gets the signal through.


Thanks in advance for you help.
 

·
Registered
Joined
·
13,199 Posts
Sounds like a bad jack in the AVR. A techie friend might be able to fix the jack, depending upon the problem (bent contact, bad solder joint, etc.) Otherwise, any competent tech should be able to replace the jack.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top