AVS Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
I have this 15" Encloser [unfinished]


Overall dimensions:32"w x 16.75"h x 20"d


Net box volume (after port displacement and avg. sub displacement of .16ft3): 3.85ft3 net


Box tuning:30hz

http://shop.davetheboxguy.com/Single-15-slot-port-075.htm



---- with this plate amp


Keiga KG5230 Subwoofer Amplifier with Electronic Crossover


•Class AB

•Discrete high current drivers and output devices

•Woofer volume control

•50Hz to 100Hz continuously adjustable low pass 12dB electronic crossover

•Crossover on/off switch

•Low and High level input, summed to mono signal

•Low and High level all pass output

•Phase inverter switch

•4dB boost @ 25Hz, 15Hz High pass

•Power output [email protected] ohms: 300

•THD: 0.08%

•S/N ratio @ rated power: 85dB

•Input sensitivity @ 100Hz - low level: 75mV

•Input sensitivity @ 100Hz - high level: 3.5V

•Input impedance: 22k ohms

•Variable Low Pass Crossover Frequency: 50-100Hz

•AC Voltage: 115 / 230 switchable

•Master power switch

•Weight: 14.5 lbs

•Dimensions W x H inches: 9-7/8 x 9-7/8 (251mm x 251mm)

•Cutout hole W x H inches: 8-7/8 x 8-7/8 (226mm x 226mm)

•Depth: 5" (plate to back of unit) (127mm)




My Question:

I need ideas for a good sub, without having to "rob the bank"

Hopefully no more than $250ish

Appreciate any and all suggestions you Folks may have
 

·
Registered
Joined
·
68 Posts
Discussion Starter · #4 ·
Thanks allot there Guys. I know this whole ordeal can be/is very subjective


Gonna be another week or three, before actually ordering.


.
 
1 - 4 of 4 Posts
Top