AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
Using the Santa Cruz's digital out with a mono 1/8 to RCA plug to a h/k avr-520 coax. If I use WinDvd with settings to use SPDIF, I get no sound, or at best if I change the settings(I forget which ones, I'm at work)I get 2.0 only from DD/DTS sources. If I use PowerDVD I only get white noise.


Any clues why the signal isn't being passed correctly? I've read of similar scenarios's in other threads but the solution usually has to do with changing the settings in Audio HQ which applies to SB cards.


Anyone with a Santa Cruz that can lend a hand?
 

·
Registered
Joined
·
189 Posts
I use a Santa Cruz with a 'stereo' 1/8" mini (versa jack) to dual RCA, plugging in the right channel (red) to coax on receiver. TB control panel set to digital out and WinDVD set to S/PDIF out. Receiver will detect automatically DD/DTS and decode accordingly. Hope this helps. =)
 

·
Registered
Joined
·
334 Posts
Quote:
Originally posted by ganesha
Using the Santa Cruz's digital out with a mono 1/8 to RCA plug
I have personally never had success using a mono jack with the digital out on the TB Santa Cruz. I have always had to use a stereo jack.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top