AVS Forum banner

1 - 20 of 11250 Posts

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #1 ·
****UNDER NO CIRCUMSTANCE SHOULD THESE SETTINGS BE USED WITH ANY OTHER SOURCE MATERIAL BEYOND THE PANEL AGING DVD OR THUMBDRIVE FILES****

Recommended 150 Hour (150 hours non-stop) Panel Aging settings for Pioneer 5020FD/6020FD (ONLY to be used with Evangelo2's DVD or Thumbdrive Files!!!!!!!!)

*****Note: This procedure is designed to be performed only during the first 150 hours of the display's lifespan. This procedure is designed to equally and evenly age all pixels and ensure the reference settings listed below provide maximum satisfaction. This procedure is NOT designed nor recommended to be used as Image Retention and/or Burn-in prevention. If a setting is not listed in the settings below, please leave it at its default value*****

Picture:

AV Selection: Sport

Contrast: 50

Brightness:0

Color: +20

Tint: 0

Sharpness: 0


Pure Cinema

Film Mode: Off

Text Optimization: Off



Screen Size: Full

Power Save Mode: Off

Orbiter: Mode 1



Recommended 150 Hour (150 hours non-stop) Panel Aging settings for Pioneer 111FD/151FD (ONLY to be used with Evangelo2's DVD or Thumbdrive Files!!!!!!!!)

*****Note: This procedure is designed to be performed only during the first 150 hours of the display's lifespan. This procedure is designed to equally and evenly age all pixels and ensure the reference settings listed below provide maximum satisfaction. This procedure is NOT designed nor recommended to be used as Image Retention and/or Burn-in prevention. If a setting is not listed in the settings below, please leave it at its default value.*****

Picture:

AV Selection: Sport

Contrast: 50

Brightness: 0

Color: +20

Tint: 0

Sharpness: 0


Pro Adjust

Pure Cinema

Film Mode: Off

Text Optimization: Off

Intelligence: Off


Picture Detail:

DRE Picture: Off

Black Level: Off

ACL: Off

Enhancer Mode: 2

Gamma: 2


Color Detail:

Color Temp: High


CTI: Off

Color Management

R 0

Y 0

G 0

C 0

B 0

M 0

Color Space: 2


Noise Reduction:


3DNR: Off

Field NR: Off

Block NR: Off

Mosquito NR: Off


Screen Size: Full

Power Save Mode: Standard

Orbiter: Mode 1


Recommended 150 (150 hours non-stop) Hour Panel Aging settings for Pioneer 500M/600M (ONLY to be used with Evangelo2's DVD!!!!!!!!)

*****Note: This procedure is designed to be performed only during the first 150 hours of the display's lifespan. This procedure is designed to equally and evenly age all pixels and ensure the reference settings listed below provide maximum satisfaction. This procedure is NOT designed nor recommended to be used as Image Retention and/or Burn-in prevention. Also, if a setting is not listed in the settings below, please leave it at its default value.*****

Picture:

AV Selection: Sport

Contrast: 50

Brightness: 0

Color: +50

Tint: 0

Sharpness: 0


Pro Adjust

Pure Cinema

Film Mode: Off

Text Optimization: Off

Intelligence: Off


Picture Detail:

DRE Picture: Off

Black Level: Off

ACL: Off

Enhancer Mode: 1

Gamma: 4


Color Detail:

Color Temp: High


CTI: Off

Color Management

R 0

Y 0

G 0

C 0

B 0

M 0

Color Space: 1


Noise Reduction:


3DNR: Off

Field NR: Off

Block NR: Off

Mosquito NR: Off


Screen Size: Full 1

Power Save Mode: Standard

Orbiter: Off


Drive Mode: 1
 

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #2 ·
Pioneer 5020FD/6020FD Non-Service Menu Adjusted Reference Settings (Can be used with (after) or without the recommended break-in procedure)

Picture:

AV Selection: Movie

Contrast: 38

Brightness: -1

Color: -4

Tint: R1

Sharpness: -15

Pure Cinema


Film Mode: Advance

Text Optimization: Off




Power Save Mode: Off


Orbiter: Mode 2



Pioneer 5020FD Service Menu Adjusted Reference Settings ( ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture:

AV Selection: Movie

Contrast: 39

Brightness: 0

Color: +1

Tint: R1

Sharpness: -15

Pure Cinema


Film Mode: Standard

Text Optimization: Off




Power Save Mode: Off


Orbiter: Mode 2

Service Menu RGB Offsets

R-High: -13

G-High: 0

B-High: +49

R-Low: 0

G-Low: 0

B-Low: 0




Pioneer 6020FD Service Menu Adjusted Reference Settings ( ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture:

AV Selection: Movie

Contrast: 40

Brightness: 0

Color: +1

Tint: R1

Sharpness: -15

Pure Cinema


Film Mode: Standard

Text Optimization: Off




Power Save Mode: Off


Orbiter: Mode 2

Service Menu RGB Offsets

R-High: +25

G-High: -5

B-High: +51

R-Low: 0

G-Low: 0

B-Low: 0

Service Menu Adjusted Calibration Reports:

 

Pioneer PDP-6020FD Post Calibration Report (Movie Mode).pdf 176.9541015625k . file

 

Pioneer PDP-5020FD Post Calibration Report (Movie Mode).pdf 175.6435546875k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #3 ·
Pioneer Elite 111FD Pure Mode Reference Settings (ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture:

AV Selection: Pure

Contrast: 37

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pro Adjust

Pure Cinema

Film Mode: Advance

Text Optimization: Off

Intelligence: Off


Picture Detail:

DRE Picture: Off

Black Level: Off

ACL: Off

Enhancer Mode: 1

Gamma: 2


Color Detail:

Color Temp: Manual

R High -1

G High 0

B High +4

R Low -1

G Low +1

B Low 0


CTI: Off

Color Management

R -2

Y +2

G -1

C -1

B +1

M -1

Color Space: 2


Noise Reduction:


3DNR: Off

Field NR: Off

Block NR: Off

Mosquito NR: Off


Screen Size: Full

Power Save Mode: Off

Orbiter: Mode 2


Calibration Report:

 

Pioneer Elite PRO-111FD Post Calibration Report (Pure Mode).pdf 177.28515625k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #4 ·
Pioneer Elite 111FD ISF-Day Reference Settings (2008 111FDs Only. ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture Settings:

AV Selection: ISF-Day

Contrast: 36

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pure Cinema: 2 (Advance)

Black Level: 0 (Off)

CTI: 0 (Off)

Color Space: 2

Color Temp: 6 (Manual)


ACL: 0 (Off)

3DYC: 2 (Mid)

I-P Mode: 2

Text Optimization: 0 (Off)

Intelligent Mode: 0 (Off)

DRE Picture: 0 (Off)


Enhancer Mode: 1

Block NR: 0 (Off)

3DNR: 0 (Off)

Field NR: 0 (Off)

Mosquito NR: 0 (Off)


Power Save Mode: Off

Orbiter: Mode 2

RGB Controls

R High: -2

G High: 0

B High: +3

R Low: -1

G Low: 0

B Low: 0

Color Management

R: -1

Y: +1

G: 0

C: -1

B: +1

M: -1

Gamma

10%R -1

10%G -1

10%B -1

20%R -1

20%G -1

20%B -1

30%R -1

30%G -1

30%B -1

40%R -1

40%G -1

40%B -1

50%R -1

50%G -1

50%B -1

60%R -1

60%G -1

60%B -1

70%R -1

70%G -1

70%B -1

80%R -1

80%G -1

80%B -1

90%R -1

90%G -1

90%B -1

Calibration Report:

 

Pioneer Elite PRO-111FD Post Calibration Report (ISF-Day).pdf 175.9970703125k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #5 ·
Pioneer Elite 111FD ISF-Night Reference Settings (2008 111FDs Only. ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture Settings:

AV Selection: ISF-Night

Contrast: 18

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pure Cinema: 2 (Advance)

Black Level: 0 (Off)

CTI: 0 (Off)

Color Space: 2

Color Temp: 6 (Manual)


ACL: 0 (Off)

3DYC: 2 (Mid)

I-P Mode: 2

Text Optimization: 0 (Off)

Intelligent Mode: 0 (Off)

DRE Picture: 0 (Off)


Enhancer Mode: 1

Block NR: 0 (Off)

3DNR: 0 (Off)

Field NR: 0 (Off)

Mosquito NR: 0 (Off)


Power Save Mode: Off

Orbiter: Mode 2

RGB Controls

R High: -3

G High: 0

B High: +3

R Low: 0

G Low: 0

B Low: 0

Color Management

R: +1

Y: +1

G: +1

C: 0

B: +2

M:-2

Gamma

10%R -1

10%G -1

10%B -1

20%R -1

20%G -1

20%B -1

30%R -1

30%G -1

30%B -1

40%R -1

40%G -1

40%B -1

50%R -1

50%G -1

50%B -1

60%R -1

60%G -1

60%B -1

70%R -1

70%G -1

70%B -1

80%R -1

80%G -1

80%B -1

90%R -1

90%G -1

90%B -1

Calibration Report:

 

Pioneer Elite PRO-111FD Post Calibration Report (ISF-Night).pdf 177.4931640625k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #6 ·
Pioneer Elite 151FD Pure Mode Reference Settings (2008 "Plus Green" 151FDs Only. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture:

AV Selection: Pure

Contrast: 38

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pro Adjust

Pure Cinema

Film Mode: Advance

Text Optimization: Off

Intelligence: Off


Picture Detail:

DRE Picture: Off

Black Level: Off

ACL: Off

Enhancer Mode: 1

Gamma: 2


Color Detail:

Color Temp: Manual

R High +2

G High -1

B High +3

R Low -1

G Low +1

B Low 0


CTI: Off

Color Management

R 0

Y +1

G +1

C -1

B +2

M -2

Color Space: 2


Noise Reduction:


3DNR: Off

Field NR: Off

Block NR: Off

Mosquito NR: Off


Screen Size: Full

Power Save Mode: Off

Orbiter: Mode 2

Calibration Report:

 

Pioneer Elite PRO-151FD Post Calibration Report (Pure Mode).pdf 181.2099609375k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #7 ·
Pioneer Elite 151FD ISF-Day Reference Settings (2008 "Plus Green" 151FDs Only. ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)
Picture Settings:

AV Selection: ISF-Day

Contrast: 38

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pure Cinema: 2 (Advance)

Black Level: 0 (Off)

CTI: 0 (Off)

Color Space: 2

Color Temp: 6 (Manual)


ACL: 0 (Off)

3DYC: 2 (Mid)

I-P Mode: 2

Text Optimization: 0 (Off)

Intelligent Mode: 0 (Off)

DRE Picture: 0 (Off)


Enhancer Mode: 1

Block NR: 0 (Off)

3DNR: 0 (Off)

Field NR: 0 (Off)

Mosquito NR: 0 (Off)


Power Save Mode: Off

Orbiter: Mode 2

RGB Controls

R High: +3

G High: -1

B High: +4

R Low: -1

G Low: +1

B Low: 0

Color Management

R: 0

Y: +2

G: +1

C: -2

B: +2

M: -1

Gamma

10%R -1

10%G -1

10%B -1

20%R -1

20%G -1

20%B -1

30%R -1

30%G -1

30%B -1

40%R -1

40%G -1

40%B -1

50%R -1

50%G -1

50%B -1

60%R -1

60%G -1

60%B -1

70%R -1

70%G -1

70%B -1

80%R -1

80%G -1

80%B -1

90%R -1

90%G -1

90%B -1

Calibration Report:

 

Pioneer Elite PRO-151FD Post Calibration Report (ISF-Day).pdf 177.8916015625k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #8 ·
Pioneer Elite 151FD ISF-Night Reference Settings (2008 "Plus Green" 151FDs Only. ControlCAL is required for these settings. ONLY use these settings after the 150 hour break-in period!!!!!!!!!)
Picture Settings:

AV Selection: ISF-Night

Contrast: 22

Brightness: 0

Color: +3

Tint: 0

Sharpness: -15


Pure Cinema: 2 (Advance)

Black Level: 0 (Off)

CTI: 0 (Off)

Color Space: 2

Color Temp: 6 (Manual)


ACL: 0 (Off)

3DYC: 2 (Mid)

I-P Mode: 2

Text Optimization: 0 (Off)

Intelligent Mode: 0 (Off)

DRE Picture: 0 (Off)


Enhancer Mode: 1

Block NR: 0 (Off)

3DNR: 0 (Off)

Field NR: 0 (Off)

Mosquito NR: 0 (Off)


Power Save Mode: Off

Orbiter: Mode 2

RGB Controls

R High: +3

G High: -1

B High: +4

R Low: -1

G Low: +1

B Low: 0

Color Management

R: 0

Y: +2

G: +1

C: -2

B: +2

M: -2

Gamma

10%R 0

10%G 0

10%B 0

20%R 0

20%G 0

20%B 0

30%R 0

30%G 0

30%B 0

40%R 0

40%G 0

40%B 0

50%R 0

50%G 0

50%B 0

60%R 0

60%G 0

60%B 0

70%R 0

70%G 0

70%B 0

80%R 0

80%G 0

80%B 0

90%R 0

90%G 0

90%B 0

Calibration Report:

 

Pioneer Elite PRO-151FD Post Calibration Report (ISF-Night).pdf 178.974609375k . file
 

Attachments

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #9 ·
Pioneer KRP-500M Pure Mode Reference Settings (ONLY use these settings after the 150 hour break-in period!!!!!!!!!)

Picture:

AV Selection: Pure

Contrast: 38

Brightness: +1

Color: +2

Tint: 0

Sharpness: -15


Pro Adjust

Pure Cinema

Film Mode: Advance

Text Optimization: Off

Intelligence: Off


Picture Detail:

DRE Picture: Off

Black Level: Off

ACL: Off

Enhancer Mode: 1

Gamma: 2


Color Detail:

Color Temp: Manual

R High -4

G High 0

B High +3

R Low -1

G Low +1

B Low +1


CTI: Off

Color Management

R 0

Y +2

G 0

C 0

B 0

M 0

Color Space: 2


Noise Reduction:


3DNR: Off

Field NR: Off

Block NR: Off

Mosquito NR: Off


Screen Size: Full 1

Power Save Mode: Standard

Orbiter: Mode 1

Drive Mode: 1


Calibration Report:

 

Pioneer KRP-500M Post Calibration (Pure Mode).pdf 195.673828125k . file
 

Attachments

·
Banned
Joined
·
328 Posts

Quote:
Originally Posted by D-Nice /forum/post/14384873

Pioneer 111FD/111FD Reference Settings [...]

Hi D-Nice,


It's great to see the settings and issues thread up and running; thanks much for starting it and posting your settings on it. I look forward to everyone's reports.


I'm guessing that the text I quoted above contains a typo, yes? Did you mean to say "111FD/151FD Reference Settings" (or am I missing something)?


Yours,


David
 

·
Registered
Joined
·
501 Posts
Thanks D-Nice.

I am confused by what you mean by:
Quote:
(Break-in DVD/Thumbdrive Owners ONLY!!!!!!! ONLY use these settings after the 150 hour break-in period!!!!!!!!

May I use these settiings if I used the DVD to Break-in my 151? I used Evangelo2's Break-in DVD with the settings recommended for the 8G plasmas.

Sorry if this is a dumb question.
 

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #14 ·

Quote:
Originally Posted by davidjschenk /forum/post/14385108


Hi D-Nice,


It's great to see the settings and issues thread up and running; thanks much for starting it and posting your settings on it. I look forward to everyone's reports.


I'm guessing that the text I quoted above contains a typo, yes? Did you mean to say "111FD/151FD Reference Settings" (or am I missing something)?


Yours,


David

Yep, and corrected
 

·
Registered
Joined
·
2,720 Posts
subscribed! btw wasnt their mutiple settings threads on 9g pioneers or am i just seeing too many threads?
 

·
Registered
Joined
·
19,384 Posts
Discussion Starter · #16 ·

Quote:
Originally Posted by maphiker /forum/post/14385196


Thanks D-Nice.

I am confused by what you mean by:


May I use these settiings if I used the DVD to Break-in my 151? I used Evangelo2's Break-in DVD with the settings recommended for the 8G plasmas.

Sorry if this is a dumb question.

It means that these settings are only for owners who did the recommended break-in proceedure. If you do not do that proceedure, do not use these settings as they will not look correct.
 
1 - 20 of 11250 Posts
Top