AVS Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
13,130 Posts
Discussion Starter · #1 ·
I'm wondering when using a 4:3 video resolution if you can control where the 16:9 TheaterTek window displays (assuming you are using a 16:9 image). I believe it displays in the middle of the screen and I would like to be able to move it towards if not at the bottom of the 4:3 image area.


Thanks in advance for any help.


Charles
 

·
Registered
Joined
·
3,534 Posts
I believe you can do this easily by bring up the Aspect Ratio window (press Ctrl-E I think), and fiddling with the screen movement buttons.
 

·
Registered
Joined
·
13,130 Posts
Discussion Starter · #3 ·
Thanks for the information. I might not have been too clear with my question so I'll try a little harder. To keep things simple...


1. The computer's desktop is set to 1280x1024.

2. Playing a 16:9 image (DVD) TheaterTek should use 1280x720.

3. Can I control (up or down) where the TheaterTek's image appears within the 1280x1024 desktop.
 

·
Registered
Joined
·
3,510 Posts
Yes. Create a custom preset in the AR editor and then set it to that preset when desired.


On my current projector setup, I have a custom AR preset for 2.35 material that moves the image to the bottom edge of my 1.77 screen. That sounds like the same thing you want to do.
 

·
Registered
Joined
·
13,130 Posts
Discussion Starter · #5 ·
Quote:
Originally Posted by Jesse S
On my current projector setup, I have a custom AR preset for 2.35 material that moves the image to the bottom edge of my 1.77 screen. That sounds like the same thing you want to do.
Yes. This is pretty close to what I want to do. Outside of the fact that your 2.35 image (when moved down) is still within the typical 16:9 image area. My projector's native resolution is 1400x1050 and I wish to use (for 16:9 images) 1400x788 and have the image displayed at the "bottom" of the 1400x1050 resolution. So that there would only be a black image (1400x612) at the top of the 1400x1050 display.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top