AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter #1
I have two Panasonic DVD Players in the same rack.


Everytime I command one of the players, via remote, the other responds.


Any ideas on how to eliminate this problem?
 

·
Registered
Joined
·
1,909 Posts
Look in your manual there should be a way to have one machine respond to a different command, (a or B). I had a similar issue with two JVC machines they allow you to do this!!
 

·
Registered
Joined
·
86 Posts
Discussion Starter #3
Oops, sorry I posted this in the wrong section. Requesting to be moved.


While I'm here, I spoke to Panasonic, after holding for about an hour (this is why I bought a speaker phone), and she told me basically that I was SOL. She said that I could put some masking tape over the one players sensor that I am not using. Well, duh!! I could also unplug one huh?


I guess that I will just have to live with getting up everytime I use a function that effects both. :(
 

·
AVS Forum Special Member
Joined
·
11,139 Posts
If you don't have something akin to the JVC dual-command feature, you might try a RF-conversion for one remote/player. Haven't delved into this area too much, but a google.com search should uncover hardware, or a post in the home theater items forums here might help. -- John
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top