[Dgreen97]

I want to run this flat wire https://www.amazon.com/gp/product/B00WITWKNG/ref=ox_sc_mini_detail?ie=UTF8&psc=1&smid=ATVPDKIKX0DER on my baseboards to 2 sony core sscs5's and wanted to know if it will be good enough for signal strength or do I have to stick with 14 gauge. If I got with 14 gauge its not flat wire and it won't do 90 degree turns which is my problem here.

 

[zieglj01]

Have you seen this
https://www.amazon.com/Rockville-R1...513&sr=1-3&keywords=14+awg+flat+speaker+cable

 

[Dgreen97]

Have you seen this
https://www.amazon.com/Rockville-R1...513&sr=1-3&keywords=14+awg+flat+speaker+cable

Nope I haven't that looks like exactly what I'm looking for, can that do 90degree bends around corners?

 

[Dgreen97]

do you also know what kind of mounting tape I should use to attach this to a baseboard?

 

[Jonas2]

I want to run this flat wire https://www.amazon.com/gp/product/B00WITWKNG/ref=ox_sc_mini_detail?ie=UTF8&psc=1&smid=ATVPDKIKX0DER on my baseboards to 2 sony core sscs5's and wanted to know if it will be good enough for signal strength or do I have to stick with 14 gauge. If I got with 14 gauge its not flat wire and it won't do 90 degree turns which is my problem here.

Have a look/read:

http://www.audioholics.com/audio-video-cables/speaker-cable-gauge

Might not be an absolute, but it's info to be considered...

 

[zieglj01]

Nope I haven't that looks like exactly what I'm looking for, can that do 90degree bends around corners?

It should do fine at bends, because of the flat design -- My RadioShack 14 awg flat cable can bend.

 

[Dgreen97]

Thanks for recommending, do you guys have any suggestions on how to attach it to the baseboard without ruining the baseboard?

 

[zieglj01]

Thanks for recommending, do you guys have any suggestions on how to attach it to the baseboard without ruining the baseboard?

Look at these
https://www.amazon.com/dp/B074H1V84...8Q&pd_rd_r=921MQ8RF26W8Z1AT5QEN&pd_rd_w=X3vjm

https://www.amazon.com/dp/B000EX4MF...t=&hvlocphy=9013383&hvtargid=pla-320010385401

 

[Dgreen97]

thanks appreciate it, i was going to use mounting tape but i see there are mounting clips for this so good thing i asked