AVS Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
`Recv`d a v372 DTC100 for mostly OTA . When I try the oval dish setup;

there does`nt seem to be a place to select a 3rd LNB, as some in this

forum have described. There is signal strength on two satellites 119 and 101 but nothing showing on the 110.


Can anyone think of a work a round for this?
 

·
Registered
Joined
·
2,412 Posts
There have been a number of firmware upgrades for the DTC100 since version 3.72, one of which provides for a menu selection of dish type and number of LNBs. Sounds like you need to see a dealer about downloading all the updates that DirecTV was sending over the years that your unit never got.
 

·
Registered
Joined
·
290 Posts
While my DTC-100 is using newer firmware, the selection of the 3-LNB setting was not intuitively obvious.


You only see the option of 2 or 3 LNB's if you reselect the oval dish, then hit OK twice.


Paul
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top