AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·

Hi,

 

This may be the most stupid question ever - my first as a new member too but if you don't ask you don't get....

 

The built in EQ in my Velodyne EQ-Max 12 sub - dies it work independently of all settings made to volume, low-pass crossover etc? or are there some default settings that these need to be set at prior to using the EQ feature?

 

Thanks in anticipation.

 

Roger
 

·
Registered
Joined
·
406 Posts
I have the model that precedes yours & it has the same internal 4 preset EQ choices. #3 Jazz/Classical is the flat (most accurate) setting with no artificial EQ boost to certain frequencies. That is the one that I & most others use for best results.


Any parameter that you set in your AVR will be on top of what is happening inside your sub. I use Audyssey to calibrate both of my Velos in Jazz/Classical mode & it works just fine; however, like many others, afterwards I raise their volumes slightly with the Velo's Remote from 2.0 to 2.5 for a little more uumph...


TAM
 
1 - 2 of 2 Posts
Top