Hello all.
This is my first post. I browsed the forum categories and decided this was the best area to post. If there is a better place, a moderator feel free to move the post. Thanks
So here's my dilemma. I need to setup classrooms in a community college so that offsite students can attend class via Microsoft Lync.So far we are using a Samsung Super High Resolution UTP Camera sub-2000. It's 600TVL interlaced video pushed out through coax. It is a connected to a Canopus ADVC-110 device, then it goes to the computer through firewire. If you check the video preview the interlacing isn't too bad. I am guessing because it is running at its native resolution.
When I start a call the video settings on the server for Microsoft Lync make it so that it is 640X480. The video is VERY interlaced. So what I assume that I would need is a hardware device that would do some deinterlacing on the fly prior to broadcasting. I am aware that it would be as good as post production deinterlacing but I need something to make it less horrible without any human interaction.
1. Does anyone know of a device/card etc that I would be able to plug the camera into so that it gets deinterlaced prior to production?
2. Does someone have a better solution than my current setup? Remember that I work for a community college that does not have a huge amount of money to spend per room. Which is one of the reasons why I don't just have a progressive scan camera.
My specialty is in computer operating systems and hardware, so forgive my A/V lack of knowledge
![]()
TIA
This is my first post. I browsed the forum categories and decided this was the best area to post. If there is a better place, a moderator feel free to move the post. Thanks
So here's my dilemma. I need to setup classrooms in a community college so that offsite students can attend class via Microsoft Lync.So far we are using a Samsung Super High Resolution UTP Camera sub-2000. It's 600TVL interlaced video pushed out through coax. It is a connected to a Canopus ADVC-110 device, then it goes to the computer through firewire. If you check the video preview the interlacing isn't too bad. I am guessing because it is running at its native resolution.
When I start a call the video settings on the server for Microsoft Lync make it so that it is 640X480. The video is VERY interlaced. So what I assume that I would need is a hardware device that would do some deinterlacing on the fly prior to broadcasting. I am aware that it would be as good as post production deinterlacing but I need something to make it less horrible without any human interaction.
1. Does anyone know of a device/card etc that I would be able to plug the camera into so that it gets deinterlaced prior to production?
2. Does someone have a better solution than my current setup? Remember that I work for a community college that does not have a huge amount of money to spend per room. Which is one of the reasons why I don't just have a progressive scan camera.
My specialty is in computer operating systems and hardware, so forgive my A/V lack of knowledge
TIA
