AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,064 Posts
Discussion Starter · #1 ·
I am running, for purpose of this thread, a Meridian 861, a Lumagen VisionHDP and an InFocus 7210 projector...


I have the following connection which I use solely for purposes of accessing the Meridian OSD for configuration purposes.


-- Meridian 861 s-video out --> Lumagen VisionHDP s-video input 7 --> InFocus 7210


-- Lumagen is set to independent output mode although I am feeding just one output; that being the InFocus 7210

PROBLEM: The OSD is not being output and this occurs regardless osf whether I use s-video input 7 or s-video input 8 on the Lumagen. Further, I know that the Meridian 861's OSD is working because when I connect a composite connection from the Meridian 861 to an old CRT monitor I have lying around it is displayed...


Any and all help would be apprecaited...


TIA...
 

·
Registered
Joined
·
2,064 Posts
Discussion Starter · #3 ·

Quote:
Originally Posted by AK47 /forum/post/0


Input 7? My HDP Pro takes s-video from inputs 5 and 6.


I just double checked...the VisionHDP (i.e. not the Pro version) takes s-video from inpouts 7 and 8....
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top