AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi guys,

My apologies if I'm posting in the wrong forum.


I'm looking to mount my TV flush to the wall, like some people have with other tvs.


In the past I've used mounts that swivel. In this case that won't be needed.


My question though, is that I've noticed as thin as this TV is, the bottom of the TV seems to bubble out where the speakers are. Therefore the TV is not flat on the back. It looks like maybe it comes out about 10mm or so.


Based on something like this mount linked below, won't this mean the TV will be slightly aimed up if the TV is pushing out where the speakers are?

Do some mounts use spacers or something of different sizes to remedy this? Anyone else run into this?


I thought I'd ask before buying :)

Thanks in advance!

http://www.amazon.com/gp/aw/d/B0026ZPFSE



Sent from my Galaxy Note 3!
 

·
Registered
Joined
·
261 Posts
The mounting surface on the back of the W900A is parallel with the front panel, so there will be no upward tilt when wall-mounted. If mounting above eye level, I would suggest using a Tilt mount to correct off-angle viewing in the vertical axis and to minimize reflections from ceiling fans/lights. Good luck with the install.
 
1 - 2 of 2 Posts
Top