AVS Forum banner
1 - 17 of 17 Posts

·
Premium Member
Joined
·
422 Posts
Discussion Starter · #1 · (Edited)
[Solved] What is a good line level booster?

Is there such a thing as a quiet (no buzz, humming) line level booster? I need to get a bit more from the MiniDSP (2V RMS up to 2.25V RMS at least).

Thanks
 

·
Super Moderator
JVC NZ9 | Sony 760ES | ST130 G4 135" | AVM-60 | MC303 &152 | 7.2.4: B&W 2x802D3/803D3/805D3| 4x15 IB
Joined
·
16,578 Posts
cleanbox pro
 

·
Premium Member
Joined
·
422 Posts
Discussion Starter · #4 ·
  • Like
Reactions: shivaji

·
Registered
Joined
·
14,207 Posts
Why not just upgrade to a MiniDSP HD?
 

·
Premium Member
Joined
·
422 Posts
Discussion Starter · #9 ·
A preamplifier (preamp or "pre") is an electronic amplifier that converts a weak electrical signal into an output signal strong enough to be noise-tolerant and strong enough for further processing, or for sending to a power amplifier and a loudspeaker.
A traditional pre-amp won't work in this case.
 

·
Premium Member
Joined
·
422 Posts
Discussion Starter · #12 ·
Well, it might work, depending on the preamp. However, it's still "RCA" level signal (around 2V RMS). Balanced is much higher, which is what I'm converting to here.
 
  • Like
Reactions: qguy

·
Premium Member
Joined
·
422 Posts
Discussion Starter · #14 ·
What kind of equipment are you using that requires that much of a voltage input?

Regards,
Wayne A. Pflughaupt
It's a Crest Pro-Lite 7.5 which requires 2.25V RMS for full output.
 

·
Premium Member
Joined
·
955 Posts
Well, it might work, depending on the preamp. However, it's still "RCA" level signal (around 2V RMS). Balanced is much higher, which is what I'm converting to here.
I'll sell you my miniDSP Balanced unit, which should have a higher output.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top