AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
How do I wire up everything to make it all work?

Well I'll start by naming all my components and what they have in the back for connections. Her goes:

1) Bell ExpressVu Satellite model 3100, 3 RCA lines, 1 s-video line, coax out, video + L/R output, coax out

2) JVC RX-518V Audio/Video Control Receiver, 18 RCA lines, NO s-video, NO Y, Pb, Pr connections, phono L/R + ground, CD L/R, tape deck play in L/R record out L/R, VCR play in L/R + video record out L/R + video, Video L/R + video, and monitor out

3) TD-W218 Double Cassette Deck, 4 RCA lines, record in L/R - play out L/R

4) XL-F152 Compact Disk Automatic Changer, 2 RCA lines, output L/R

5) AV-2055 Stereo TV, 5 RCA lines, Video input and audio L/R, output variable L/R

6) Toshiba W625CF VHS Recorder, 6 RCA & 2 Coax lines, video input + L/R, video output + L/R, coax antenna in & out

7) SR-5617 Stereo Turn Table, 2 RCA lines, L/R output + ground wire

8) Panasonic DVD-RP56 DVD Player. 7 RCA lines, 1 s-video line, 1 digital audio line, audio out video + L/R, sub-woofer, Y, Pb, Pr, optical


I don't seem to have enough plug ins in the back of my amp for everything. Now what do I do?


Thanks for your help.
 

·
Registered
Joined
·
133 Posts
One solution you could try is running your bell epressvu through the video in on your vcr. Then running the video out to your receiver. You should be able to switch between the signals on your vcr then.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks PJINMN, I've got it all working now.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top