[nother]

I when was Flashing firm 4,3 in my x1, the pc turn off in the file TsunamiHE_v23_Bootcode and now the projector does not ignite and the PC not connect with x1. exists solution?


Thanks you.


P.D: Sorry my english is very bad, I from spain.

 

[Cyrano]

Try this thread: http://www.avsforum.com/avs-vb/showt...ght=x1+4.3+4.1


or this thread: http://www.avsforum.com/avs-vb/showt...ght=x1+4.3+4.1


Good luck

 

[nother]

I have tried this theards but the PC does not recognize the X1 and the Flashusb1.6 always puts "waiting for new connection". x1 ignites because the ventilator turns but the green LED does not ignite. Can I reflash x1 other way??MY x1 is young to die, only 300h.


please help!!!!!!.


Thank`s Cyrano.


P.D:Spain hasn`t service center

 

[puddytay]

sorry but I think you screwed.

 

[Cyrano]

Sorry for your situation nother.


Hello Technut - can you help?

 

[Hughman]

Quote:

Originally posted by nother I have tried this theards but the PC does not recognize the X1 and the Flashusb1.6 always puts "waiting for new connection".

When you attempted this the second time did you remember to depress the two keystone keys when you turn on the PJ?

 

[Cyrano]

Quote:

Originally posted by Hugh2 When you attempted this the second time did you remember to depress the two keystone keys when you turn on the PJ?

And keep holding those buttons down as you power up.


Hugh makes a good point. Double check each move and read the detailed instructions Technut gave in one of the links I provided.

 

[nother]

yes,I remember to press two buttons.


Please new options???


Thanks

 

[FourDoor]

Have you tried unplugging the X1 alltogether? Then once you have had it unplugged for a minute, hold down the two buttons while you flip the switch.


Just a suggestion since cold booting sometimes helps most electronics...

 

[nother]

Yes, I have tried all.

I believe that the file tsumaniHE_bootcode is fundamental for that x1 and the PC communicates and my PC turn off when flash this file.


I want not think that my x1 is died...



please more help ....



Thanks.

 

[SpeedyHTPC]

Give a call to Infocus on the phone for some help.

 

[nother]

Quote:

Originally posted by SpeedyHTPC Give a call to Infocus on the phone for some help.

Spain hasn`t service center and I don`t speak english


I need to deceive the program flashusb so that it puts "connected" becouse I believe that the X1 is active to recive new flash, (but x1 does not send information to the PC by the previous bad flash and for this reason flashusb does not put "connected" ) I need some form brute force flash.

undestarnd me??


Thanks for all.

 

[Cyrano]

Here is the Spanish speaking European website:
http://www.infocus.com/spn/emea/home...&site_region=3


Here is the Service for the above website:
http://www.infocus.com/service/index...site_region=3&


There is also a Spanish speaking website for the Americas:
http://www.infocus.com/spn/amer/home...&site_region=1


In one of the threads (I don't know if it was one I gave you or not) it seems that there was someone who had a problem very similar to yours.


You might do an extensive and complete search of all the pertinent threads.


Here is a cut and paste instruction I use whenever explaining the search area here at AVS. (The Search I speak of is on the top of the webpage [to the left of HT Marketplace], not the search just above the threads list.)


"Use the "crawler" setting in the lower left corner of the Search area as the default "faster" setting does very little and is not faster. There is an even more complete search option below the "crawler" setting (it says: "Use only if REALLY needed).



You might want to find someone who can help you if you feel your English isn't good enough to understand all this.

I do think your English is pretty good, though.


Keep at it - you'll get it.


Edit: One more thread to try: http://www.avsforum.com/avs-vb/showt....3#post4359349

And there is another thread link within this thread.

 

[nother]

I called the nº telephone (+34 91 401 9812)

that infocus page put in spanish service center but this telephone don`t exist.

I use crawler search now.


I continue trying it.


Thanks.


P.D:My english is bad ,the google`s translator is good

 

[Cyrano]

Quote:

Originally posted by nother My english is bad ,the google`s translator is good

Google as translator isn't too bad.

 

[nother]

I have been looking for very posts and I dont find nothing similar to my problem, I have changed the windows registry but it does not obtain resultt. I had often changed firm without any problems but this time the pc turn off and my x1 is died.


i`m screwed, but i continue trying it.


Google as translator can be bad but is a good dictionary



thanks for everything.

 

[Cyrano]

Quote:

Originally posted by nother Google as translator can be bad but is a good dictionary thanks for everything.

I stand corrected. From this end you seem to be doing understandable English.


You are welcome. I wish there was more we could do for you than just wish you Buena Suerte. (or is it Bueno )


There must be a Spanish-speaking Infocus Tech. I hope you find him.

 

[nother]

I have thought about taking x1 to service center of IBM because the ILV300 is same projector than x1, I hope to have luck.


THanks for all Cyrano (you in spain have one friend )

 

[Scott Osmond]

I'd try these numbers (TratarÃ*a estos números) :


InFocus European Sales and Service

World Trade Center Amsterdam

Tower G

Strawinskylaan 585

1077 XX Amsterdam

The Netherlands

Telephone: (31) (0) 20 579 2000

Fax: (31) (0) 20 579 2999


Call InFocus Toll-Free From (Peaje-Liberta de llamada InFocus De):

Spain: 900 993 163