AVS Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
35 Posts
Discussion Starter · #3 ·
Do you have a part number or link? and will it handle 480p? (most of my gear does 480p)
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #5 ·
I went ahead and ordered one. :D Gets here tomorrow. I'll be using it with my Audio Authority 1154. I'll let you know how it goes.
 

·
Registered
Joined
·
57 Posts
MrWendle:


I am trying to figure out what you are trying/wanting to do with both devices. I also have some switching issues.



Rich M.
 

·
Registered
Joined
·
93 Posts
My question is, how many component devices do you have? That's a LOT of ports!! I really do like the AA 1154 box but the 1 output limits me... The other one, I don't like too much because it does not allow for PCM/Coax or Optical for sound... Decisions, decisions......


Let me how your config works out, okay?


Thx,
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #8 ·
A Total of 8


Xbox

GameCube

PS/2

(3) Replay 5040's (all upgraded)

Sony DVP-NS755V

Sony SAT-HD300 (on order, hasn't shipped yet)


I'll be using the AVT-5842 to simply route interlaced/progressive to the correct port on the X1(although the extra component ports are nice)
 

·
Registered
Joined
·
93 Posts
How are you hooking everything up? Do you already have a plan?? Is everything going to the 5842 and then on to the 1154 or vice-versa? Or are you using the video capability of the first one and the audio of the second one...?


I'm actually trying to build a similar system but always have issues with the 2 outputs (5842) and support for digital sound (1154).


Just picking brains... :)


Thanks,
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #10 ·
No problem. :) Here the config I've worked out until the Sony HD300 arrives (I'll most likely pick up another 1154 at that time)


I'm running a Sony STR-DB830 w/ 3 optical ins


Input 1 on 5842 - GameCube (RCA Audio)

Input 2 on 5842 - PS/2 (RCA Audio)

Input 3 on 5842 - Sony NS755V (Optical into DVD on AMP)

Input 4 on 5842 - Link to AA 1154 (Optical into TV/SAT on AMP)


Input 1 of 1154 - XBox (Optical)

Input 2 of 1154 - Replay 1 (Optical)

Input 3 of 1154 - Replay 2 (Optical)

Input 4 of 1154 - Replay 3 (Optical)


RCA audio outputs on the 5842 (Video 1&2) will be plugged into Video 1&2, respectively, on my amp.


Video Output 1 on the 5842: Component in on the X1

Video Output 2 on the 5842: Progressive in on the X1


I have a Pronto TSU-1000, which handles all of my current input switching - (almost buddy proof) - via macros.


Side tip - I used the the GE AV23322 (Component + Optical) Cable.

Can't tell the difference between them and my Monster cables, and only $20 a pop. Just don't put too much stress on the optical coming out of the 1154, as it has a tendency to pop out.
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top