[Wil32]

I check , rechecked, and rechecked seems like i'm blind or something, but my server wont boot help me please, you guys here have been so much help for me here, so please help me.


Thanks


William


P.S. i removed the 2 sata controller to take the pictures, they were plugged in during the test and tested also plugged out.

 

[DJWikiera]

Are you getting power to the board? Is your power supply switched on? Power switch connected correct. You may have to remove CPU and reseat, try 1 stick of memory.

 

[Wil32]



Quote:
Originally Posted by DJWikiera /forum/post/16888013


Are you getting power to the board? Is your power supply switched on? Power switch connected correct. You may have to remove CPU and reseat, try 1 stick of memory.

im not sure if im getting power to the board, power to the psu, im sure i can hear it. reseted the cpu, removed 1 stick of ram. still nothing

 

[DJWikiera]

What happens when you remove all the modular cables from the power supply? Try and short the power button pins on the motherboard with a small screwdriver. Last but not least, take out motherboard and psu and do a bench test. Could have a short somewhere.

 

[Wil32]

i dont get the screwdriver thing, but i got an appointement on monday for bench test


EDIT: LED on board doesnt light up

 

[DJWikiera]

Shorting the pins real quick would act like the power switch to see if it's not the problem. Have you checked Corsair website for troubleshooting power supply?

 

[Wil32]

i was able to make it start but no VGA, PS/2, ethernet was working,


I have to get the power supply on ON. then i slowly put ther ATX cable into the motherboard, so the board start to sparkles then it stays powered.


Once i turn off the motherboard with the power button fromt the case, the motherboard seems no more likely powered

EDIT: Just tried 2 other PSU on the motherboard, The motherboard is DEAD!