AVS Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I've just bought a RX-V565 and connected it to my Samsung BD-P1500 Blu-Ray and my monitor both via HDMI. When I turn the blu-ray player on the samsung logo appears briefly on the screen and then disappears and the monitor says no signal. I've searched through forums and not found a similar problem. I've tried changing the settings on the blu-ray to 720p and 1080p and neither resolution works (my monitor supports both) I've been through the receivers settings and can't find anything that may be wrong. I've tried changing the HDMI cable's but that doesn't fix it either.


The receiver works fine when using my Wii but that's connected by composite.


Any suggestions?
 

·
Registered
Joined
·
3,395 Posts

Quote:
Originally Posted by jmsbwtr /forum/post/18179346


I've just bought a RX-V565 and connected it to my Samsung BD-P1500 Blu-Ray and my monitor both via HDMI. When I turn the blu-ray player on the samsung logo appears briefly on the screen and then disappears and the monitor says no signal. I've searched through forums and not found a similar problem. I've tried changing the settings on the blu-ray to 720p and 1080p and neither resolution works (my monitor supports both) I've been through the receivers settings and can't find anything that may be wrong. I've tried changing the HDMI cable's but that doesn't fix it either.


The receiver works fine when using my Wii but that's connected by composite.


Any suggestions?

If you just connect the Samsung BD-P1500 Blu-Ray to your monitor using HDMI, and completely disconnect the RX-V565, do Blu-Ray disks play properly? (In two channel audio only when connected just to the tv, of course...)
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Yes, if I connect it directly blu-ray's play fine, have done for a while now. I bought the receiver to get surround sound and so I could connect my wii to my monitor (there are no composite connections on it)
 

·
Registered
Joined
·
360 Posts

Quote:
Originally Posted by jmsbwtr /forum/post/18179346


I've just bought a RX-V565 and connected it to my Samsung BD-P1500 Blu-Ray and my monitor both via HDMI. When I turn the blu-ray player on the samsung logo appears briefly on the screen and then disappears and the monitor says no signal. I've searched through forums and not found a similar problem. I've tried changing the settings on the blu-ray to 720p and 1080p and neither resolution works (my monitor supports both) I've been through the receivers settings and can't find anything that may be wrong. I've tried changing the HDMI cable's but that doesn't fix it either.


The receiver works fine when using my Wii but that's connected by composite.


Any suggestions?

What display are you using? How old is it?


Mark
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
It's a viewsonic vx2260wm, it's about a year old. It supports HDCP but I'm beginning to think it may be a HDCP problem? I've ordered a component cable so I can connect the blu-ray player to the receiver that way and see if that works. Lower quality I know but at least it would work...
 
1 - 5 of 5 Posts
Top