AVS Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
I will be getting a Matinee 1HD very soon. I will be mounting it on a "shelf" whcih can move 10 inches forward for 4X3, 1.78, and 1.85 material and in the back position for 2.35 material. I will be projecting roughly 124 inches for 2.35 material and 114 inches for everything else.


I would like to get a custom-made screen that is 39 inches high and 92 inches wide. For all sources I would have a constant height of 39 inches. 2.35 sources would be just under 92 inches wide, 16X9 sources would be just over 69 inches wide, and 4X3 sources would be 52 inches wide. Viewing distance will be just over 10.5 feet; I feel this gives a good compromise with 1.4X screen width for 2.35, 1.8X screen width for 16X9, and 2.4X for 4X3 material.


I have almost total elimination of ambient light in this room. It looks like I will have 21 foot-lamberts of light for 2.35 material, 37 foot-lamberts for 16X9, and 28 foot-lamberts for 4X3. (I don't mind softening the focus for reduction of screen-door effect.)


Could someone please suggest a manufacturer who makes custom 2.35:1 screens as well as which model/material would best fit this LCD projector in this particular environment.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top