AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello,


I assume that it's possible to improve the picture quality of my Zenith Pro880X with some adjustments in the Service Menu. Unfortunately I don't have a Service Manual. I would be very happy, if you could help me.



1. There is a picture problem, which can be seen on all sources via the S-Video input. It seems that the Y- and C-signals are out of phase.


Q: Is it possible to adjust the chroma delay for the S-Video input?



2. To avoid the chroma delay problem, I've tried to use the RGB-input instead of the S-Video input. Via the RGB-input I can display a picture with 60Hz (NTSC) with quite good results. As an option I would like to use the RGB-input for 50Hz (PAL) sources. But with PAL-DVDs, there is any problem with the synchronization, so that the picture is moving vertically.

Note that I use a sync stripper and feed the RGB-input with the C-sync signal.


Q: Is it possible to adjust the Pro880X, so that it displays 50Hz sources correctly via the RGB-input.


Thank you very much for your assistance in advance.


Harald
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top