AVS Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1,897 Posts
Discussion Starter #1
I am building up my first HTPC and have run into a problem with installation of the Zoltrix Genie (KBK) modded card. The Zoltrix hardware installation card calls for an audio cable between the Zoltrix card and the audio card. My audio card is the M-Audio AP2496 which does not have internal onboard connectors for audio input. The connections are setup for external input. Can someone who has installed this combination give me some tips as to how this should be accomodated. When I went through the actual Zoltrix software installation procedure it asked for the audio channel but there were no choices in the drop down menus and it would not take a typed input.

Any help for this HTPC newbie would really be appreciated.


Thanks,


Doyle
 

·
Registered
Joined
·
1,897 Posts
Discussion Starter #2
I'm not getting much response so I'll try rephrasing a simpler question.


Is the Audio from the Zoltrix Genie card passed to the AP2496 over the bus or does it need an analog connection via wire as suggested in the manual?


..Doyle
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top